Today we’re discussing an air compressor that requires regular maintenance piston air Gardner Denver compressors in GA, also known as a reciprocating air compressors. These machines function at a lower horsepower than rotary screw compressors, but despite that, these compressors are reliable and useful for many applications.
Why Piston Compressors Need Maintenance
The inside of a piston compressor is similar to an internal combustion engine. The main parts include a piston head that rises and falls as a crankshaft rotates. And there are also numerous valves, plates, rods, and gauges that keep the machine running smoothly.
All these moving parts can wear down or become dislocated with regular use. The more you use your compressor, the greater the chances that it will develop issues. However, you can somewhat reduce the need for major repairs if you are diligent about maintenance.
Spending time on piston compressor maintenance now saves you time and money later. When your compressor remains in good condition, you can rely on it to not stop functioning and halt your work. Regular maintenance also helps extend the life of your Gardner Denver compressors in GA, meaning you won’t have to replace it as often.
Now that you know why you need to spend time on piston compressor upkeep, let’s cover what maintenance tasks you should perform daily, weekly, monthly,and as needed.
Daily Maintenance Tasks
Most of the crucial maintenance to your piston compressor occurs before you turn it on each day. Perform these tasks each time you use your air compressor:
Clean the unit, wiping off any dust, grease, or grime;
Inspect the electrical wires for anything out of the ordinary;
Look for loose parts and tighten them as needed;
Check the oil level;
Look for air leaks and correct any issues before you use the compressor;
Inspect the air filter to make sure it’s clean enough so that you can use the machine safely and effectively.
While these tasks seem easy enough, don’t let their simplicity lure you into avoiding them. They only take one or two extra minutes on most days, so make performing them a habit.
Any time you finish using your Gardner Denver compressors in GA, you need to perform a few additional maintenance tasks, one of which is to drain the air tanks. Depending on how much you use your unit, you may need to drain them periodically throughout the day as well. If you work in a high-humidity area,
draining the tanks several times a day is highly recommended.
Weekly Maintenance Tasks
A piston compressor uses an air filter to ensure that tiny pollutants stay out of the compressor’s air supply. The filter catches these particles and keeps them away from the machine’s vital parts.
Because a piston compressor pushes so much air through itself and the filter, you should check the air filter weekly. Your compressor probably has a reusable filter that you can clean. If you are noticing that the filter is becoming particularly dirty or that it has become damaged, replace it.
Monthly Maintenance Tasks
Another crucial component of your piston Gardner Denver compressors in GA is its safety release valve, which continually monitors the compressor tank’s pressure when the machine is in use. If the pressure reaches a predetermined limit, the safety valve triggers to stop the motor.
As-Needed Maintenance Tasks for Gardner Denver Compressors in GA
If your piston compressor is oil-lubricated, you’ll need to change the pump oil at least once a year, and anytime it becomes contaminated, so check the oil periodically. When it’s time to replace the oil, use the type of oil recommended by Gardner Denver. If you use an oil with a thickness that’s too high or too low, your compressor could sustain permanent damage.
If you want your piston compressor to last for years, perform these maintenance tasks regularly. If you have additional questions about caring for your Gardner Denver compressors in GA, call our office today to speak with a compressor expert.